In the context of the new approach directives issued by the European Union, the regulations to which the machines are usually subject are:

•      2006 / 42 / AT Machinery Safety Regulations

•      2006 / 95 / AT Low Voltage Directive (LVD)

•      2004 / 108 / AT Electromagnetic Compatibility Regulation (EMC)

Within the scope of these regulations, the studies to be carried out under the 2006 / 95 / AT Low Voltage Directive (LVD) are as follows:

•      Electrical tests and electrical inspection within the scope of TS EN 60204-1 standard (Safety in machinery - Electrical equipment of machines - Section 1: General rules)

•      Regulation Annex-1 Basic health safety requirements control work

•      Inspection of machine conformity assessment

These studies are carried out by inspection and test facilities and laboratories. These organizations LVD tests In addition, they must be accredited by national or international accreditation bodies to provide other technical services. Otherwise, the reports to be prepared at the end of the inspection and test work will not have an official validity.

According to LVD, Low Voltage Directive, the following tests are performed:

  • Insulation test
  • High voltage test
  • Leakage current test
  • Earth line continuity test
  • Tests for combustion properties
  • Physical strength tests
  • IP powder and water tests

During the process of standardization, TS EN 60204-1 standard (safety in machines - electrical equipment of the machines - part 1: general rules), which is most closely related to machine manufacturers, TS EN 60335-1 standard which is closely related to the white goods manufacturers (safety rules - home and similar places The electrical components of all products with CE marking and testing have been put on the agenda for the electrical devices used - Section 1: General rules.

These electrical tests are carried out on the products, and what is important is to report the conformity of the test results to the standards. Both the TS EN 60204-1 standard and the TS EN 60335-1 standard are basically the same. However, there are some differences in terms of construction and applied values.

A large number of certification bodies and inspection and testing organizationfor a fee. In order to make the LVD test an appropriate fee, a fee comparison should be made between these organizations. But before that, what is important is the fact that this institution has received authorization from the accreditation body within or outside the country. Searching for wages and conducting LVD tests may not provide the expected benefit.

The TÜRCERT certification body carries out LVD tests between various inspection and test studies. Specifically, CE marking of the products of companies to test their products, to pass before the dispute is important to be important. These products can be collected from the market if the products with CE label are not provided with the safety and minimum requirements required by the standard.

TÜRCERT certification bodyprovides certain technical services, such as inspection and test work, to the demanding organizations with the most appropriate fee conditions. In this context, LVD Low Voltage Test TÜRCERT certification company with its experienced and expert staff is always with you.